A secure temporary anchorage point is essential when workers need fall protection around beams, columns or other structural members. In many work-at-height situations, workers cannot access a permanent anchor, so a portable strap provides a practical way to create a safe tie-off point.

PN806(1.5M)(ME) is a Cross Arm Strap made from 44 mm wide polyester webbing with a small D-ring at one end and a larger D-ring at the other. Workers can wrap the 1.5 m configuration around suitable structural members to create a temporary anchorage point for compatible fall-protection equipment.

The strap is lightweight, easy to carry and simple to install. Its reinforced webbing construction helps reduce wear during regular site use, while the two D-rings make connection straightforward. Nassguard supplies the Safety Anchor Strap across Qatar and Doha for construction, industrial maintenance, concrete structures, utilities, telecom, power plants and other professional work-at-height applications.

What is PN806 Cross Arm Strap?

PN806 is a portable Type B anchorage strap designed to create a temporary connection point around a suitable beam, column or structural member. The strap uses high-strength polyester webbing. The manufacturer specifies a width of 44 mm, giving the strap a durable construction suitable for repeated industrial use.

One end includes a small D-ring, while the opposite end uses a larger D-ring. This difference allows the strap to be wrapped around a structure and connected in a controlled way. The 1.5 m length gives workers enough reach for many common anchorage arrangements without creating excessive loose webbing. The manufacturer offers PN806 in multiple lengths, including 1.0 m, 1.5 m, 1.8 m and 2.0 m. Because it is portable, the D-Ring Anchor Strap can be removed after the job and reused at another suitable location.

Key Features of PN806

• 44 mm Polyester Webbing: Provides a strong and flexible anchorage connection.
• 1.5 Metre Length: The selected configuration offers practical reach for common structural anchorage points.
• Small D-Ring: Provides one attachment end for wrapping and connection.
• Large D-Ring: Creates a clear anchorage connection point at the opposite end.
• 18 kN Minimum Breaking Strength: The manufacturer lists a minimum breaking strength of 18 kN for three minutes.
• Portable Type B Anchor: The strap can be installed temporarily and removed after use.
• Lightweight Design: Easy to carry around construction and industrial sites.
• Reinforced Stitching: Helps improve durability during repeated handling.
• Flexible Installation: Suitable for compatible beams, columns and structural members.
• Professional Height Safety: Designed for use with approved fall-protection equipment.

Uses of Cross Arm Strap

• Temporary Anchorage: The strap creates a portable anchorage point where a permanent anchor is not available.
• Beam Connection: Workers can wrap it around suitable structural beams.
• Column Anchorage: The strap can be used around compatible columns and fixed members.
• Fall Protection: It provides a connection point for compatible fall-arrest equipment.
• Work Restraint: The strap can form part of a properly designed restraint system.
• Construction Work: Workers can use it during selected elevated construction activities.
• Industrial Maintenance: Technicians can create a temporary anchor around suitable plant structures.
• Telecom Work: The strap can support selected height-safety setups on compatible structures.
• Utility Work: Maintenance teams can use it where a temporary structural anchor is required.
• General Work at Height: The Work Height Strap provides a simple portable anchorage solution.

Applications Across Qatar and Doha

• Construction Sites in Qatar: Contractors can use PN806 around suitable beams and structural members.
• Doha High-Rise Projects: Maintenance teams can create temporary anchorage points during selected elevated work.
• Industrial Plants: Technicians can use the strap around compatible structural members during maintenance.
• Concrete Structures: PN806 is suitable for selected anchorage arrangements around compatible structural sections.
• Oil and Gas Facilities: The strap can support temporary fall-protection connections during planned work at height.
• Power Plants: Maintenance teams can use it on suitable structural members during elevated inspection and service work.
• Telecom Sites: The Industrial Anchor Strap can support compatible fall-protection systems.
• Warehouses: Maintenance personnel can use it for selected elevated service activities.
• MEP Projects in Doha: Technicians can create a temporary tie-off point during high-level installation work.
• Infrastructure Projects: PN806 can support suitable anchorage arrangements during structural and maintenance activities.
• Steel Structures Across Qatar: The strap can wrap around compatible steel members where the system design allows.
• General Height Safety in Doha: The Fall Protection Strap provides a portable anchorage option for trained users.

Technical Specifications

The current manufacturer specification confirms 44 mm polyester webbing, small and large D-rings, 18 kN minimum breaking strength and multiple available lengths including 1.5 m.

Certifications, Standards and Compliance

• EN 795:2012 Type B – Portable Anchor Devices
• AS/NZS 5532:2013 – Manufacturing Requirements for Single-Point Anchors
• IS 3521 (Part 7):2021 – Anchor Devices
• ANSI Z359.18-2017 – Anchorage Connectors

Why Choose PN806 from Nassguard?

• Simple Anchorage Solution: PN806 creates a temporary tie-off point around suitable structural members.
• Durable Polyester Webbing: The 44 mm construction supports regular industrial use.
• Dual D-Ring Design: Small and large D-rings make wrapping and connection easier.
• 18 kN Strength: The manufacturer lists a minimum breaking strength of 18 kN for three minutes.
• Portable Design: Workers can remove the strap and reuse it at another suitable location.
• Practical 1.5 m Length: This configuration provides useful reach for many common anchorage setups.
• Multiple Length Options: The PN806 family is available in several standard lengths.
• Recognised Standards: PN806 is listed with EN 795:2012 Type B, AS/NZS 5532:2013 and IS 3521 (Part 7):2021.
• Wide Industrial Use: Suitable for construction, maintenance, utilities, telecom and structural work.
• Local Supply: Nassguard supplies the Cross Arm Strap across Qatar and Doha.

Frequently Asked Questions

1. What is PN806(1.5M)(ME)?

PN806 is a Cross Arm Strap made from 44 mm polyester webbing with a small D-ring at one end and a large D-ring at the other.

2. What is the length of this PN806 configuration?

The supplied configuration has a length of 1.5 metres.

3. What is the breaking strength of PN806?

The manufacturer lists a minimum breaking strength of 18 kN for three minutes.

4. What material is the strap made from?

PN806 uses 44 mm wide polyester webbing with reinforced stitching.

5. What is the purpose of the two D-rings?

The small and large D-rings help the strap wrap around a suitable structural member and provide a clear connection point for compatible fall-protection equipment.

6. Which standards apply to PN806?

The current manufacturer listing includes EN 795:2012 Type B, AS/NZS 5532:2013 and IS 3521 (Part 7):2021.

7. Where can I buy PN806 in Qatar?

Nassguard supplies the Cross Arm Strap PN806 for customers across Qatar and Doha.

Conclusion

PN806 provides a straightforward way to create a temporary anchorage point when workers cannot use a permanent anchor. Its 44 mm polyester webbing gives the strap a strong but flexible construction, making it easy to wrap around suitable beams, columns and structural members. The manufacturer lists a minimum breaking strength of 18 kN for three minutes, supporting its use in professional height-safety applications.

The small and large D-rings are another important part of the design. They help workers install the strap around a structure and create a clear connection point for compatible lanyards, lifelines or other fall-protection equipment. The 1.5 m length gives this configuration enough reach for many common site applications while keeping the strap compact and easy to handle. Because it functions as a portable Type B anchor, users can remove and reposition it as the job changes.

For construction, industrial maintenance, utilities, telecom, power facilities, concrete structures and general work-at-height activities, the Cross Arm Strap provides a practical temporary anchorage solution for trained workers. Nassguard supplies PN806(1.5M)(ME) across Qatar and Doha for professional fall-protection and anchorage requirements.