Large workshops, warehouses, production areas, commercial spaces, and semi-open facilities often need high-volume airflow without relying entirely on conventional refrigerated air-conditioning. The Duct Air Cooler SYC-20 PP provides a practical solution for these applications. Its axial fan, evaporative cooling system, and duct-compatible construction allow cooled air to move into targeted work areas.

The SYC-20 PP supports top, down, or side air discharge, which gives installers more flexibility when planning the air distribution system. It operates on a 3-phase 220V/415V electrical supply and uses a 1.1 kW motor. The unit suits industrial and commercial cooling projects in Qatar and Doha, where high ambient temperatures can make workplace cooling particularly important.

Nassguard supplies the SYC-20 PP and other industrial cooling equipment across Qatar, Doha, and surrounding industrial areas.

What is a Duct Air Cooler?

A Duct Air Cooler is an evaporative cooling unit that cools incoming air and distributes it through an air outlet or connected duct system. Instead of using a compressor-based refrigeration cycle, an evaporative cooler uses water evaporation to reduce the temperature of incoming air. The axial fan then moves the cooled air toward the required space.

The SYC-20 PP provides several installation possibilities because users can configure the air discharge from the top, bottom, or side. This flexibility makes the unit useful when the cooler must sit outside the main working area while ductwork carries air into the building. Its 1160 × 1160 × 950 mm body combines a compact footprint with the capacity required for suitable industrial and commercial spaces.

Key Features of SYC-20 PP

• Flexible Air Discharge: Top, down, and side discharge options support different duct layouts.
• Axial Fan: The axial fan moves a large volume of air through the cooling system.
• Low Motor Power: The unit uses a 1.1 kW motor for its cooling and airflow operation.
• Three-Phase Supply: It supports 220V or 415V three-phase electrical configurations.
• Multiple Speed Options: Single-speed and multi-speed configurations allow users to match airflow with site requirements.
• Flexible Control: Manual and remote-control options simplify daily operation.
• Useful Static Pressure: An air pressure range of 180–200 Pa supports suitable ducted installations.
• Large Cooling Coverage: The stated cooling area ranges from approximately 150–200 m² under suitable operating conditions.
• Integrated Water Tank: A 30–35 L tank supplies water for the evaporative cooling process.
• Large Air Outlet: The 672 × 672 mm outlet supports high-volume air movement.

Key Uses of SYC-20 PP

• Warehouse Cooling: Supplies cooled air to suitable storage and material-handling areas.
• Factory Cooling: Improves airflow around production and assembly spaces.
• Workshop Cooling: Helps reduce heat buildup in mechanical and industrial workshops.
• Commercial Cooling: Supports large commercial spaces that require continuous fresh-air movement.
• Production Areas: Delivers evaporatively cooled air to suitable manufacturing zones.
• Maintenance Areas: Improves working conditions in hot maintenance and service locations.
• Ducted Cooling: Connects with suitable ductwork to distribute air to selected areas.
• Semi-Open Areas: Provides high-volume air movement where conventional closed-room AC may prove impractical.

Applications in Qatar and Doha

• Doha: Warehouses, workshops and commercial facilities can use the SYC-20 PP to circulate cooled air through large working areas.
• Doha Industrial Area: Factories, garages and fabrication workshops can use the cooler for ducted airflow across production and maintenance zones.
• New Industrial Area: Manufacturing units and warehouses can install the SYC-20 PP to distribute cooled air into busy workspaces.
• Al Rayyan: Workshops, warehouses and commercial buildings can use the unit to improve airflow and workplace cooling.
• Al Wakrah: Industrial facilities and workshops can use the cooler for fresh-air circulation and evaporative cooling.
• Al Wakra Industrial Area: Light and medium industrial facilities can connect the unit to suitable ducts for targeted cooling.
• Birkat Al Awamer: Warehouses, logistics facilities and workshops can use the SYC-20 PP to improve cooling across storage and working areas.
• Aba Saleel: Logistics centres and industrial facilities can use the cooler to distribute fresh, cooled air through warehouses and workshops.
• Mesaieed: Industrial plants and workshops can use the SYC-20 PP for cooling suitable production, maintenance and storage areas.
• Ras Laffan: Industrial support facilities can use the cooler to improve airflow in suitable workshops, warehouses and maintenance areas.
• Dukhan: Workshops and industrial support facilities can use the unit for evaporative cooling in suitable working and storage areas.
• Al Khor: Warehouses, workshops and commercial facilities can use the cooler to improve air circulation in large spaces.
• Umm Salal: Storage facilities and workshops can use the SYC-20 PP for ducted cooling and continuous fresh-air movement.
• Lusail: Commercial buildings, maintenance facilities and service areas can use the unit for suitable large-space cooling applications.

Technical Specification

Note: An airflow figure was not provided in the available SYC-20 PP specifications, so it should not be added without confirmation from the current product datasheet.

How Does the SYC-20 PP Work?

The cooling process starts when the unit draws warm outside air toward its evaporative cooling section. Water circulates through the cooling media, keeping the required surface wet. As warm air passes through this media, part of the water evaporates. That evaporation absorbs heat from the air and reduces its dry-bulb temperature. The axial fan then moves the resulting air through the 672 × 672 mm outlet.

Installers can connect the outlet to a suitable duct network. Depending on the site arrangement, air can discharge upward, downward, or sideways. Because the system continuously introduces air, the building needs an appropriate exhaust or relief-air path. Good ventilation prevents excessive indoor humidity and helps maintain useful airflow through the occupied space.

Why Choose SYC-20 PP from Nassguard?

Nassguard supplies industrial cooling equipment for demanding workplaces in Qatar and Doha. The SYC-20 PP combines duct compatibility with straightforward evaporative cooling technology.

Its three discharge arrangements give designers more freedom during installation. Meanwhile, the 180–200 Pa air-pressure range supports suitable duct distribution. Manual or remote controls provide practical operating choices, while the axial fan handles the air movement required by larger spaces.

For each project, users should consider the building size, humidity, required air changes, duct resistance, electrical supply, and desired indoor conditions before selecting the final system.

Standards, Certifications and Compliance

For the exact SYC-20 PP supplied, product-specific certification should be confirmed against the manufacturer’s current declaration and nameplate. Relevant standards and regulatory references for this type of electrical cooling equipment may include:

• IEC 60335 – Safety of Household and Similar Electrical Appliances
  
• ISO 9001 – Quality Management Systems
  
• CE Marking – European Product Requirements
  
• RoHS – Restriction of Hazardous Substances
  

These are relevant reference standards rather than confirmation that every SYC-20 PP unit carries each certification. Check the current technical file before using certification logos or compliance statements.

Frequently Asked Questions

1. What is the SYC-20 PP Duct Air Cooler?
The SYC-20 PP is an industrial evaporative air cooler that can distribute cooled air through top, down, or side discharge arrangements.

2. What area can the SYC-20 PP cool?
The stated coverage is approximately 150–200 m², although actual performance depends on temperature, humidity, ventilation, and installation conditions.

3. What power supply does the cooler require?
The listed electrical configuration is 3-phase 220V/415V at 50 Hz.

4. Can the SYC-20 PP connect to ductwork?
Yes, its air outlet and multiple discharge arrangements make it suitable for properly engineered ducted cooling installations.

5. What is the water tank capacity?
The listed water tank capacity is approximately 30–35 litres.

6. Where can the SYC-20 PP be used?
It suits suitable warehouses, factories, workshops, production facilities, commercial areas, and industrial workplaces.

7. Where is the SYC-20 PP available in Qatar?
Nassguard supplies industrial air coolers for customers across Qatar and Doha, subject to current stock and project requirements.

Conclusion

The Duct Air Cooler SYC-20 PP offers a straightforward cooling option for industrial and commercial environments where fresh-air movement and ducted distribution matter. Its axial fan, 1.1 kW power rating, 180–200 Pa air pressure, multiple discharge directions, and 150–200 m² stated coverage make it suitable for a broad range of workplace cooling projects.

Top, down, and side discharge options also allow installers to adapt the unit to different building layouts. For projects in Qatar and Doha, Nassguard supplies the SYC-20 PP along with other industrial ventilation and cooling solutions.