The Stainless Steel Air Cooler offers a rugged evaporative cooling solution for factories, warehouses, workshops, production areas, garages, and large commercial spaces. Unlike standard plastic-body coolers, this industrial model uses SS 304 stainless steel for its outer construction. That gives the unit a durable body suited to demanding working environments. Synergy lists its SS cooler as the SYC-18/30 SS, with airflow ranging from 18,000 to 30,000 CMH and coverage from 150 to 300 m².

Nassguard supplies industrial cooling solutions across Qatar and Doha, including requirements for warehouses, workshops, logistics facilities, factories, and other large work areas.

What is a Stainless Steel Air Cooler?

A Stainless Steel Air Cooler is an industrial evaporative cooling system built inside a stainless-steel housing. It draws warm air through wet cooling media, where water evaporation removes part of the heat. An axial fan then moves the cooler fresh air into the working area.

The SYC-18/30 SS range uses a Stainless Steel 304 body, axial fan, 415V three-phase electrical supply, and top/front air-discharge arrangement. The manufacturer publishes an airflow range of 18,000–30,000 CMH, making the range suitable for large-space cooling rather than small-room applications.

An SS body also offers practical durability. Synergy specifically describes its stainless-steel coolers as rust-resistant and low-maintenance and lists factories, warehouses, restaurants, hospitals, and other large spaces among their applications.

Key Features of the SS Body Air Cooler

• SS 304 Body: Stainless-steel construction provides a robust exterior for demanding commercial and industrial environments.
• High Airflow: The SYC-18/30 SS range provides 18,000–30,000 CMH airflow.
• Axial Fan: The axial configuration moves a high volume of air across large spaces.
• Flexible Power Range: Available configurations use 1.1, 1.5, or 3 kW, depending on the selected model.
• Top/Front Discharge: The discharge arrangement provides flexibility when planning airflow.
• Industrial Power Supply: The published configuration operates on 3-phase 415V, 50 Hz.
• 180–200 Pa Pressure: The manufacturer lists this operating pressure range for the SS cooler series.
• Large Coverage: Published coverage ranges from approximately 150 to 300 m², depending on model and operating conditions.

Uses of the SS Body Air Cooler

• Factory Cooling: Supplies fresh cooled air around production and assembly areas.
• Warehouse Cooling: Improves airflow around packing, storage, picking, and dispatch zones.
• Workshop Cooling: Provides cooling around fabrication, mechanical, and maintenance areas.
• Production Areas: Moves fresh air toward occupied workstations and active production zones.
• Commercial Facilities: Supports suitable large commercial spaces that require continuous fresh-air movement.
• Garage Cooling: Improves workplace airflow around vehicle repair and servicing areas.
• Industrial Ventilation Support: Combines high-volume air movement with evaporative cooling.
• Large-Space Cooling: Serves facilities where small portable coolers cannot provide enough airflow.

Applications Across Qatar and Doha

• Doha: Factories, warehouses, workshops, and commercial facilities can use the cooler for high-volume fresh-air cooling.
• Doha Industrial Area: Fabrication shops, garages, and industrial workshops can use it around production and maintenance zones.
• Al Rayyan: Warehouses and commercial facilities can use the unit for cooling and air circulation in large ventilated spaces.
• Al Wakrah: Workshops and storage facilities can use industrial evaporative cooling around active working areas.
• Birkat Al Awamer: Warehouses and logistics operations can use the cooler around packing, loading, storage, and dispatch zones.
• Aba Saleel: Logistics facilities and warehouses can use the unit to improve airflow around occupied operational areas.
• Mesaieed: Industrial plants and workshops can use the cooler in suitable production, maintenance, and storage sections.
• Ras Laffan: Industrial support facilities can use it in suitable workshops, service buildings, and maintenance areas.
• Al Khor: Warehouses, garages, and workshops can use the cooler for large-area workplace cooling.
• Umm Salal: Storage and commercial facilities can use the system where high-volume fresh-air circulation is required.
• Lusail: Commercial and service facilities can use evaporative cooling where building conditions and ventilation are suitable.

Technical Specification

These specifications come from Synergy’s published product catalogue for the SYC-18/30 SS range.

Specification note: Another current Synergy sales listing shows an SS Body Air Cooler with a 180 L tank, 1120 × 610 × 1730 mm dimensions, 415V supply, and 550–750 W consumption. Because those figures are not presented as the same SYC-18/30 SS catalogue configuration, they should not be mixed into the table above without confirming the exact unit being supplied.

How Does the Stainless Steel Air Cooler Work?

Water continuously wets the cooling media inside the unit. The axial fan draws warm fresh air across this wet surface. Water evaporation absorbs heat from the passing air, after which the fan distributes the cooler air through the workplace.

Evaporative cooling works differently from compressor-based air conditioning. The system benefits from continuous fresh-air exchange rather than a completely sealed room. Synergy notes that its evaporative systems work with wet cooling pads and suit open or semi-open spaces.

Proper ventilation remains important. Warm, humid air needs an exit path while fresh air enters the facility. Ambient humidity, outdoor temperature, heat load, building size, and ventilation will affect actual cooling performance.

Why Choose a Stainless Steel Air Cooler from Nassguard?

Industrial sites often require equipment that can handle frequent operation and demanding workplace conditions. The SS 304 construction gives this cooler a sturdy exterior, while its axial fan provides the high-volume airflow required for larger spaces.

The range also covers different cooling requirements. With published airflow from 18,000 to 30,000 CMH and coverage from 150 to 300 m², customers can select a configuration according to the facility and required airflow.

Nassguard supplies industrial air coolers and cooling equipment for customer and project requirements across Doha and Qatar.

Standards, Certifications and Compliance

The exact certificates for the supplied unit should be checked against its current manufacturer documentation. Relevant references include:

• IEC 60335 – Electrical Appliance Safety
  
• ISO 9001 – Quality Management Systems
  
• CE Marking Requirements
  
• RoHS – Restriction of Hazardous Substances
  

These are relevant standards and regulatory references. They do not establish that every supplied SS Body Air Cooler carries each certification.

Frequently Asked Questions

1. What is a Stainless Steel Air Cooler?
It is an evaporative cooler with a stainless-steel housing that uses water evaporation and high-volume airflow to cool suitable industrial or commercial spaces.

2. What material is used for the cooler body?
Synergy specifies Stainless Steel 304 for the SYC-18/30 SS range.

3. What is the airflow capacity?
The manufacturer catalogue lists 18,000–30,000 CMH, depending on the selected configuration.

4. How much area can the cooler cover?
Synergy states approximately 150–300 m², although real coverage depends on temperature, humidity, ventilation, and site conditions.

5. What power supply does the SS cooler require?
The published SYC-18/30 SS range uses 3-phase 415V at 50 Hz.

6. Where can an Industrial SS Air Cooler be used?
Factories, warehouses, workshops, production areas, garages, restaurants, and other suitable large spaces can use this type of cooler.

7. Is the Stainless Steel Air Cooler available in Qatar?
Nassguard supplies industrial cooling solutions for requirements across Qatar and Doha.

Conclusion

The Stainless Steel Air Cooler combines an SS 304 body with industrial evaporative cooling for demanding large-space applications. The SYC-18/30 SS range offers 18,000–30,000 CMH airflow, axial fan operation, 180–200 Pa pressure, and stated cooling coverage of 150–300 m².

Its construction makes it a practical choice for factories, warehouses, workshops, garages, logistics facilities, and other locations where durability and strong airflow matter. With suitable ventilation and correct sizing, the system can deliver continuous fresh-air cooling without relying on a conventional refrigerant cooling cycle.

Nassguard supplies the SS Body Air Cooler for industrial and commercial cooling requirements across Doha and Qatar.