The SYC-18 PP Duct Air Cooler is a high-volume evaporative cooling unit for factories, warehouses, workshops, production areas, commercial facilities, and other large spaces. With an airflow capacity of 18,000 CMH, the unit moves a substantial volume of fresh air while using only 1.1 kW of power.

The SYC-18 PP uses an axial fan and supports top or side air discharge, making it easier to connect the unit to different duct layouts. Its listed cooling coverage is approximately 150–200 m², depending on temperature, humidity, ventilation, building heat load, and installation conditions.

Nassguard supplies the SYC-18 PP Duct Air Cooler for industrial and commercial cooling requirements across Qatar and Doha, including warehouses, workshops, logistics facilities, and manufacturing sites.

What is the SYC-18 PP Duct Air Cooler?

The SYC-18 PP Duct Air Cooler is an industrial evaporative cooler that uses water and outside air to provide fresh-air cooling. Warm outside air enters the cooler and passes through water-wetted cooling media. As some of the water evaporates, it absorbs heat from the incoming air. An axial fan then moves this cooler air through the outlet and into a suitable duct system.

Unlike conventional refrigerated air conditioning, evaporative cooling does not rely on compressor-based refrigeration. Synergy describes its duct air coolers as systems for supplying fresh, cool air through ductwork into large spaces or multiple areas. This operating principle makes the unit practical for large workplaces where continuous fresh-air movement matters.

Key Features of SYC-18 PP

• 18,000 CMH Airflow: The cooler moves a large volume of air for industrial and commercial cooling applications.
• 1.1 kW Power: The motor provides high-volume airflow with relatively low electrical demand.
• Axial Fan: The axial fan handles continuous air movement through the cooling system.
• Top or Side Discharge: Two outlet arrangements provide flexibility when planning duct routes.
• 180–200 Pa Air Pressure: The available pressure supports suitable ducted air distribution.
• Single or 12-Speed Option: Different speed configurations allow users to adjust operation according to site requirements.
• Manual or Remote Control: Operators can choose the control arrangement that suits the installation.
• 150–200 m² Coverage: The stated cooling area suits many medium-to-large industrial spaces.
• Large Water Capacity: The manufacturer catalogue lists a 225 L water tank for the SYC-18 PP model.
• Compact Industrial Size: Its 1020 × 1020 × 950 mm dimensions help simplify installation where space is limited.

Uses of SYC-18 PP

• Warehouse Cooling: Moves fresh cooled air through storage, packing, and material-handling areas.
• Factory Cooling: Supplies evaporatively cooled air to suitable manufacturing and assembly zones.
• Workshop Cooling: Helps manage heat inside fabrication, mechanical, and maintenance workshops.
• Production Areas: Directs fresh air toward workstations and machinery zones through suitable ducts.
• Logistics Facilities: Improves air movement around packing, loading, and storage operations.
• Commercial Cooling: Supports large commercial spaces where evaporative cooling suits the environment.
• Maintenance Areas: Provides fresh-air circulation in suitable equipment service and repair areas.
• Ducted Air Distribution: Allows one cooling unit to deliver air toward selected areas through properly designed ductwork.

Applications Across Qatar and Doha

• Doha: Warehouses, workshops, and commercial facilities can use the SYC-18 PP to distribute fresh cooled air across working areas.
• Doha Industrial Area: Factories, garages, and fabrication workshops can use the cooler for ducted airflow around production and maintenance zones.
• Al Rayyan: Workshops and warehouses can use the unit to improve fresh-air circulation in suitable working spaces.
• Al Wakrah: Industrial and commercial facilities can use the cooler for evaporative cooling and continuous air movement.
• Birkat Al Awamer: Warehouses, workshops, and logistics facilities can use the unit for cooling storage and operational areas.
• Aba Saleel: Logistics centres and industrial facilities can use the cooler to distribute fresh air through warehouses and workshops.
• Mesaieed: Industrial plants and workshops can use the SYC-18 PP in suitable production, maintenance, and storage areas.
• Ras Laffan: Industrial support facilities can use the cooler to improve airflow within suitable workshops and maintenance spaces.
• Al Khor: Warehouses and service facilities can use the unit for fresh-air circulation and workplace cooling.
• Umm Salal: Storage facilities and workshops can use the cooler for suitable ducted evaporative cooling.
• Lusail: Commercial and service facilities can use the SYC-18 PP where building conditions suit evaporative cooling.

Technical Specification

How Does the SYC-18 PP Work?

The cooler draws warm outdoor air through wet evaporative cooling media. Water evaporation absorbs heat from the passing air, lowering its temperature before the axial fan moves it toward the outlet. From the 670 × 670 mm outlet, ductwork can direct the airflow toward selected parts of a warehouse, workshop, factory, or commercial building.

Good ventilation remains important. Warm indoor air needs a route to escape while fresh cooled air enters the space. Synergy notes that evaporative systems perform effectively in large and open areas and work with continuous fresh-air circulation. Actual cooling performance varies with ambient temperature, humidity, air changes, heat load, duct resistance, and installation design.

Why Choose SYC-18 PP from Nassguard?

The SYC-18 PP combines 18,000 CMH airflow with a relatively compact body and 1.1 kW power rating. That combination makes it useful when a facility needs high-volume air movement without installing a larger unit than the application requires.

Its top or side discharge configuration also gives installers more flexibility when connecting ducts. Manual and remote controls simplify operation, while single or 12-speed configurations provide different airflow-control options.

Nassguard supplies industrial cooling and ventilation solutions for customers across Doha and Qatar, supporting requirements for factories, workshops, warehouses, logistics facilities, and commercial projects.

Standards, Certifications and Compliance

Product-specific certification should always be checked against the documentation supplied with the exact SYC-18 PP unit. Relevant standards and regulatory references can include:

• IEC 60335 – Safety of Household and Similar Electrical Appliances
  
• ISO 9001 – Quality Management Systems
  
• CE Marking Requirements
  
• RoHS – Restriction of Hazardous Substances
  

These are relevant reference standards and regulations, not confirmation that every SYC-18 PP unit carries each certification. Confirm the current manufacturer’s declaration, test reports, and certificates before adding compliance logos to a technical submission.

Frequently Asked Questions

1. What is the SYC-18 PP Duct Air Cooler?
It is an industrial evaporative cooling unit that delivers fresh cooled air directly or through suitable ductwork.

2. What is the airflow capacity of the SYC-18 PP?
The manufacturer lists an airflow capacity of 18,000 CMH.

3. What area can the SYC-18 PP cool?
Its stated coverage is approximately 150–200 m², although actual performance depends on climate, ventilation, and site conditions.

4. What power supply does the cooler require?
The catalogue specifies 3-phase 220V/415V, 50 Hz operation with a 1.1 kW power rating.

5. Can the SYC-18 PP connect to ductwork?
Yes, Synergy’s duct cooler range is intended to distribute cooled air through suitable duct systems.

6. Where can the SYC-18 PP be used?
It suits appropriate factories, warehouses, workshops, logistics facilities, production areas, and commercial spaces.

7. Where is the SYC-18 PP available in Qatar?
Nassguard supplies industrial cooling solutions for customers and projects across Qatar and Doha.

Conclusion

The SYC-18 PP Duct Air Cooler offers a practical combination of high airflow, evaporative cooling, and duct compatibility for industrial and commercial facilities. Its 18,000 CMH airflow, 1.1 kW power rating, axial fan, 180–200 Pa pressure, and 150–200 m² stated cooling area make it suitable for many medium-to-large workplace cooling requirements.

Top or side air discharge provides useful installation flexibility, while manual or remote controls simplify operation. Factories, warehouses, workshops, production areas, and logistics facilities can integrate the unit into properly planned fresh-air cooling systems.

Nassguard supplies the SYC-18 PP for industrial cooling requirements across Doha and Qatar.