The SYC-25 PP Duct Air Cooler provides high-volume fresh-air cooling for warehouses, factories, workshops, production floors, logistics centres, and other large facilities. With an airflow range of 22,000–25,000 CMH, this industrial evaporative cooler can move a substantial amount of air through suitable ductwork and distribute it to selected working areas.

The SYC-25 PP uses an axial fan with 1.5/2.2 kW power options. It operates on a 3-phase 415V, 50 Hz supply and produces approximately 180–200 Pa air pressure. Its stated cooling coverage reaches 200–250 m², although actual results depend on Qatar’s temperature, humidity, ventilation, building heat load, and duct design.

Nassguard supplies the SYC-25 PP Duct Air Cooler for industrial and commercial projects across Qatar and Doha, including Doha Industrial Area, Al Rayyan, Al Wakrah, Birkat Al Awamer, Mesaieed, Ras Laffan, Al Khor, and surrounding areas.

What is the SYC-25 PP Duct Air Cooler?

The SYC-25 PP Duct Air Cooler is a duct-compatible evaporative cooling system that uses water evaporation to lower the temperature of incoming fresh air. Hot outside air first passes through water-wetted cooling media. During this process, a small portion of the water evaporates and absorbs heat. The axial fan then draws the resulting cooler air through the unit and pushes it toward the air outlet.

A properly engineered duct network can carry this air to different sections of a building. This arrangement works particularly well when the cooler needs to remain outside while fresh air reaches workers inside a warehouse, workshop, or factory. Unlike compressor-based air conditioning, evaporative cooling continuously introduces fresh air. The building therefore needs adequate exhaust openings or ventilation paths for warm indoor air to leave.

Key Features of SYC-25 PP

• High Airflow: The unit delivers approximately 22,000–25,000 CMH for demanding workplace cooling.
• Axial Fan: Its axial fan handles continuous high-volume air movement.
• Power Options: The SYC-25 PP comes with 1.5/2.2 kW configurations.
• Ducted Distribution: The large outlet allows cooled air to enter a properly designed duct network.
• Air Pressure: A 180–200 Pa pressure range supports suitable duct installations.
• Industrial Power Supply: The unit operates on 3-phase 415V at 50 Hz.
• Flexible Control: Manual and remote-controller options make everyday operation straightforward.
• Large Cooling Area: Stated coverage reaches approximately 200–250 m² under suitable operating conditions.
• Water Tank: A 35–40 L tank supplies water for the evaporative cooling process.
• Top/Down Discharge: The discharge arrangement provides flexibility when planning the duct route.

Uses of SYC-25 PP

• Warehouse Cooling: Supplies fresh cooled air to storage, packing, and material-handling areas.
• Factory Cooling: Moves air through suitable manufacturing and assembly spaces.
• Workshop Cooling: Helps manage heat inside mechanical, fabrication, and maintenance workshops.
• Production Cooling: Directs fresh air toward selected production and operator zones.
• Logistics Facilities: Improves airflow around storage, sorting, loading, and dispatch operations.
• Maintenance Areas: Provides continuous fresh-air movement around suitable equipment service areas.
• Commercial Cooling: Serves large commercial spaces where evaporative cooling matches site conditions.
• Ducted Cooling: Distributes cooled air to selected areas instead of limiting airflow to the immediate area around the unit.

Applications Across Qatar and Doha

• Doha: Warehouses, workshops, and commercial facilities can use the SYC-25 PP to circulate cooled fresh air across large working areas.
• Doha Industrial Area: Factories, garages, and fabrication workshops can use the cooler for ducted airflow through production and maintenance zones.
• Al Rayyan: Warehouses and workshops can use the unit to improve air circulation in suitable industrial and commercial spaces.
• Al Wakrah: Industrial facilities can use the cooler for evaporative cooling and continuous fresh-air movement.
• Birkat Al Awamer: Warehouses, workshops, and logistics operations can use ducted cooling across storage, packing, and working areas.
• Aba Saleel: Logistics centres and industrial facilities can use the unit for high-volume air distribution through warehouses and workshops.
• Mesaieed: Industrial plants can use the SYC-25 PP in suitable production, maintenance, workshop, and storage areas.
• Ras Laffan: Industrial support facilities can use the cooler to improve airflow within suitable workshops and maintenance spaces.
• Al Khor: Warehouses, workshops, and service facilities can use the unit for workplace cooling and fresh-air circulation.
• Umm Salal: Storage facilities and workshops can use the SYC-25 PP for suitable ducted cooling applications.
• Lusail: Commercial and service facilities can use the cooler where building conditions favour evaporative cooling.

Technical Specification

These values should be checked against the latest manufacturer datasheet or unit nameplate before using them for final project submittals.

How Does the SYC-25 PP Work?

The process starts with water circulating across the evaporative cooling media. Hot fresh air enters the machine and travels through this wet surface. As water evaporates, it absorbs heat from the passing air. The axial fan then moves this cooled air toward the 775 × 775 mm outlet. From there, suitably sized ducts can carry the airflow into the required parts of the building.

Evaporative cooling works differently from refrigerated AC. It relies on fresh-air replacement rather than repeatedly recirculating the same enclosed air. For this reason, suitable exhaust openings and good air movement through the building play an important role. Temperature and humidity also affect performance. Qatar’s site conditions should therefore form part of the selection process rather than choosing a cooler only from the floor area.

Why Choose SYC-25 PP from Nassguard?

The SYC-25 PP sits between smaller duct coolers and very high-capacity units, making it practical for facilities that need substantial airflow without moving immediately to the largest models. Its 22,000–25,000 CMH airflow, axial fan, and 180–200 Pa pressure range support large-space air distribution. The 775 × 775 mm outlet also provides a useful connection point for appropriately sized ducts.

Nassguard supplies industrial cooling and ventilation solutions across Doha and Qatar, supporting warehouses, workshops, factories, logistics facilities, commercial sites, and other project requirements.

Standards, Certifications and Compliance

The exact certifications for the supplied SYC-25 PP should be confirmed from its current manufacturer documentation. Relevant standards and regulatory references for this type of equipment include:

• IEC 60335 – Safety of Household and Similar Electrical Appliances
  
• ISO 9001 – Quality Management Systems
  
• CE Marking Requirements
  
• RoHS – Restriction of Hazardous Substances
  

These are relevant references rather than confirmation that every SYC-25 PP carries each certification. Verify the manufacturer’s latest declarations, certificates, and test documentation before adding compliance claims to tenders or datasheets.

Frequently Asked Questions

1. What is the SYC-25 PP Duct Air Cooler?
The SYC-25 PP is an industrial evaporative cooling unit that moves fresh cooled air directly or through suitable ductwork.

2. What is the airflow capacity of the SYC-25 PP?
The listed airflow options are approximately 22,000 and 25,000 CMH.

3. How much area can the SYC-25 PP cool?
The stated cooling area is approximately 200–250 m², subject to temperature, humidity, ventilation, heat load, and installation conditions.

4. What power does the SYC-25 PP use?
The listed power options are 1.5 kW and 2.2 kW, depending on the selected configuration.

5. Can the SYC-25 PP work with ducting?
Yes, its 775 × 775 mm air outlet can connect to a suitably designed duct distribution system.

6. Where can this cooler be used?
It suits appropriate warehouses, factories, workshops, production areas, logistics facilities, maintenance buildings, and large commercial spaces.

7. Is the SYC-25 PP available in Qatar?
Nassguard supplies industrial cooling solutions for project and customer requirements across Qatar and Doha.

Conclusion

The SYC-25 PP Duct Air Cooler provides a practical way to introduce large volumes of fresh cooled air into industrial and commercial workplaces. Its evaporative cooling process suits facilities that need continuous airflow rather than conventional closed-room refrigeration.

With 22,000–25,000 CMH airflow, 1.5/2.2 kW power options, 180–200 Pa air pressure, and stated coverage of 200–250 m², the model can serve warehouses, workshops, factories, production areas, and logistics operations.

The top/down discharge arrangement also makes duct planning more flexible. Nassguard supplies the SYC-25 PP and other industrial cooling equipment across Doha, Qatar, and nearby industrial areas.