The SYC-35 PP Duct Air Cooler provides high-volume evaporative cooling for factories, warehouses, workshops, production floors, logistics facilities, and other large working areas. Instead of cooling only the space directly around the machine, a duct system can carry fresh cooled air to selected areas of a building.

With 25,000–30,000 CMH airflow, an axial fan, and 2.2/3 kW power options, the SYC-35 PP handles demanding industrial cooling requirements. Its 180–200 Pa air pressure also makes it practical for suitable duct installations.

Nassguard supplies industrial air cooling solutions across Qatar and Doha, including requirements in Doha Industrial Area, Al Rayyan, Al Wakrah, Birkat  Al Awamer, Mesaieed, Ras Laffan, Al Khor, Umm Salal, and nearby industrial locations.

What is an SYC-35 PP Duct Air Cooler?

The SYC-35 PP Duct Air Cooler is an industrial evaporative cooling unit that uses water evaporation and high-volume airflow to cool fresh incoming air. Warm outdoor air enters the cooler and travels through wet cooling media. Water absorbs heat as it evaporates, reducing the air temperature. An axial fan then pushes the cooled air toward the outlet. From there, a properly planned duct network can distribute it to workstations, production areas, storage zones, or other required sections.

This principle makes duct air coolers useful for large buildings where individual portable coolers cannot distribute air effectively. Synergy describes its duct coolers as evaporative systems intended for factories, warehouses, workshops, commercial buildings, and other large spaces.

Key Features of SYC-35 PP Duct Air Cooler

• High Airflow: The SYC-35 PP delivers approximately 25,000–30,000 CMH for large-area cooling.
• Axial Fan: The axial fan moves a high volume of air through the cooling system.
• Power Options: The unit comes with 2.2 kW and 3 kW power configurations.
• Industrial Voltage: It operates on a 3-phase 415V electrical supply.
• Useful Air Pressure: The 180–200 Pa range supports suitable ducted air distribution.
• Flexible Operation: Single-speed and multi-speed options support different operating requirements.
• Simple Controls: Manual and remote-controller configurations make daily operation convenient.
• Large Coverage: The stated cooling area reaches approximately 200–250 m² under suitable conditions.
• Integrated Water Tank: A 35–40 L tank supplies water for the evaporative process.
• Large Air Outlet: The 805 × 805 mm outlet allows substantial air movement into a suitable duct arrangement.

Uses of SYC-35 PP Duct Air Cooler

• Factory Cooling: Supplies fresh cooled air to suitable production and assembly areas.
• Warehouse Cooling: Improves air movement around storage, packing, and material-handling zones.
• Workshop Cooling: Helps manage heat in fabrication, mechanical, and maintenance workshops.
• Production Cooling: Directs cooled air toward selected manufacturing areas.
• Logistics Facilities: Supports airflow in packing, loading, and warehouse operations.
• Commercial Buildings: Provides evaporative cooling for suitable large commercial spaces.
• Service Centres: Helps improve airflow around automotive and equipment service areas.
• Ducted Cooling: Carries cooled air from an externally positioned unit to selected indoor zones.

Applications Across Qatar and Doha

• Doha: Warehouses, workshops, and commercial facilities can use the SYC-35 PP to distribute cooled air across large working areas.
• Doha Industrial Area: Factories, garages, and fabrication workshops can use the cooler for ducted airflow across production and maintenance zones.
• Al Rayyan: Workshops, warehouses, and commercial buildings can use the unit to improve fresh-air circulation and workplace cooling.
• Al Wakrah: Industrial facilities and workshops can use the SYC-35 PP for evaporative cooling and continuous air movement.
• Birkat Al Awamer: Warehouses and logistics facilities can use ducted cooling to serve storage, packing, and working areas.
• Aba Saleel: Logistics centres, workshops, and warehouses can use the cooler for high-volume air distribution.
• Mesaieed: Industrial plants and workshops can use the unit for suitable production, maintenance, and storage areas.
• Ras Laffan: Industrial support facilities can use the cooler to improve airflow in suitable workshops and maintenance buildings.
• Al Khor: Warehouses, workshops, and service facilities can use the SYC-35 PP for large-space air circulation.
• Umm Salal: Storage facilities and workshops can use the cooler for ducted fresh-air cooling.
• Lusail: Large commercial and service facilities can use the unit where evaporative cooling suits the building conditions.

Technical Specification

Technical note: The SYC-35 PP figures above follow the product specifications supplied for this model. Synergy’s current public product page lists its duct-air-cooler family, but the current online catalogue search did not expose a separate SYC-35 PP table. Therefore, confirm these figures against the latest SYC-35 PP datasheet or nameplate before tender submission. Synergy describes the overall range as high-performance evaporative systems for ducted distribution.

How Does the SYC-35 PP Work?

Water continuously wets the cooling media inside the unit. When hot outside air passes through this media, some of the water evaporates and absorbs heat from the air. The axial fan then moves the resulting fresh, cooled air toward the outlet. A duct network can carry this airflow to selected parts of a factory, warehouse, workshop, or commercial facility.

Unlike refrigerated air conditioning, evaporative cooling works with a continuous supply of fresh air. Synergy notes that these systems work particularly well where fresh air can enter and exhaust air can leave the building. Actual performance varies with outdoor temperature, relative humidity, duct resistance, ventilation, heat load, building layout, and air-change requirements. A site assessment therefore matters when sizing the system.

Why Choose SYC-35 PP from Nassguard?

For large working areas, airflow distribution matters as much as cooling capacity. The SYC-35 PP combines substantial air delivery with a duct-compatible layout, allowing a system designer to send cooled air where workers actually need it. Its 25,000–30,000 CMH stated airflow makes it suitable for larger applications, while the 2.2/3 kW configurations provide options for different project requirements. The manual or remote-control arrangement also keeps operation straightforward.

Nassguard supplies industrial cooling and ventilation solutions for projects across Doha and Qatar, supporting factories, warehouses, workshops, logistics facilities, and commercial applications.

Standards, Certifications and Compliance

The exact certifications supplied with an SYC-35 PP unit should be verified from the manufacturer’s current technical documentation. Relevant standards and regulatory references may include:

• IEC 60335 – Safety of Household and Similar Electrical Appliances
  
• ISO 9001 – Quality Management Systems
  
• CE Marking Requirements
  
• RoHS – Restriction of Hazardous Substances
  

These links provide relevant standards information; they do not establish that every SYC-35 PP carries each certification. Confirm the latest certificates and declarations before making project-specific compliance claims.

Frequently Asked Questions

1. What is the SYC-35 PP Duct Air Cooler?
The SYC-35 PP is an industrial evaporative cooler that supplies high-volume cooled fresh air to suitable ducted spaces.

2. What is the airflow capacity of the SYC-35 PP?
The supplied specification lists an airflow range of approximately 25,000–30,000 CMH.

3. How much area can the SYC-35 PP cool?
Its stated coverage is approximately 200–250 m², depending on climate, ventilation, heat load, and installation conditions.

4. Can the SYC-35 PP connect to an air duct?
Yes, the unit is intended for suitable ducted air distribution systems in industrial and commercial spaces.

5. What electrical supply does the unit require?
The listed configuration uses 3-phase 415V, 50 Hz power.

6. Where can the SYC-35 PP be installed?
Typical applications include factories, warehouses, workshops, production areas, logistics facilities, service centres, and suitable commercial buildings.

7. Is the SYC-35 PP available in Qatar?
Nassguard supplies industrial cooling solutions for customers across Qatar and Doha, subject to current product availability.

Conclusion

The SYC-35 PP Duct Air Cooler offers a practical approach to cooling large industrial and commercial environments. Its high-volume airflow can move fresh evaporatively cooled air through suitable ductwork, helping reach production areas, workshops, warehouses, and other spaces where standalone coolers may provide limited coverage.

With 25,000–30,000 CMH airflow, 2.2/3 kW power options, an axial fan, 180–200 Pa air pressure, and stated coverage of 200–250 m², the unit fits demanding large-space applications. Nassguard supplies the SYC-35 PP for cooling requirements across Doha and Qatar.