Large factories and warehouses often need more than a portable cooler placed near the workforce. Air needs to travel across the building and reach the areas where people, machinery, and production activity generate heat. The SYC-40 PP Duct Air Cooler addresses this requirement with a high-volume evaporative cooling system that can work with suitable air ducts.

The manufacturer lists the SYC-40 PP (PRM) within its duct air cooler range. This model delivers 30,000 CMH airflow, uses a 3 kW motor, and provides 180–200 Pa air pressure. Its stated cooling coverage reaches approximately 250–300 m² under suitable conditions.

Nassguard supplies industrial cooling solutions across Qatar and Doha for warehouses, workshops, factories, logistics facilities, maintenance areas, and other commercial or industrial requirements.

What is the SYC-40 PP Duct Air Cooler?

The SYC-40 PP Duct Air Cooler is a large evaporative air cooling unit made for high-volume fresh-air delivery. It draws hot outside air through wet cooling media, where water evaporation removes part of the heat. An axial fan then pushes the cooled air toward the outlet.

Unlike a small portable cooler, this unit can connect with properly sized ductwork. This allows installers to carry air from the cooler to selected areas inside a factory, workshop, warehouse, or other large building.

The manufacturer describes its duct air coolers as evaporative systems that provide fresh, cooled air through ducts to large spaces or multiple zones. Typical applications include factories, warehouses, workshops, showrooms, commercial buildings, and industrial facilities.

Key Features of SYC-40 PP Duct Air Cooler

• 30,000 CMH Airflow: High-volume air delivery serves large industrial and commercial areas.
• 3 kW Power: The motor provides the power required for demanding airflow applications.
• Axial Fan: The axial design moves a substantial volume of air through the cooler.
• Top or Down Discharge: Two discharge arrangements provide flexibility when planning the installation.
• Duct Compatibility: The 900 × 900 mm outlet can connect with a suitably designed air distribution system.
• 180–200 Pa Pressure: Available air pressure supports appropriate ducted installations.
• Large Cooling Coverage: The stated cooling area reaches approximately 250–300 m² under suitable conditions.
• 40–45 L Water Tank: The integrated tank supplies water to the evaporative cooling system.
• Remote Control Option: Manual or remote-controller operation simplifies everyday use.
• PP Construction: The plastic body provides a practical housing for industrial evaporative cooling applications.

Uses of SYC-40 PP Duct Air Cooler

• Factory Cooling: Moves fresh cooled air into suitable production and assembly areas.
• Warehouse Cooling: Improves airflow across storage, packing, and material-handling zones.
• Workshop Cooling: Helps reduce heat buildup in mechanical and fabrication workshops.
• Production Areas: Directs cooled air toward selected manufacturing work zones.
• Logistics Facilities: Supports ventilation and cooling around storage and dispatch operations.
• Maintenance Areas: Improves fresh-air circulation in suitable equipment service spaces.
• Commercial Buildings: Provides high-volume evaporative cooling for appropriate large commercial areas.
• Ducted Cooling Systems: Carries cooled air to specific sections through properly designed ductwork.

Applications Across Qatar and Doha

• Doha: Warehouses, workshops, and commercial facilities can use the SYC-40 PP to distribute cooled fresh air across large working areas.
• Doha Industrial Area: Factories, garages, and fabrication workshops can use the cooler for high-volume airflow across production and maintenance zones.
• Al Rayyan: Warehouses and workshops can use the unit to improve air circulation in suitable large spaces.
• Al Wakrah: Industrial and commercial facilities can use the cooler for evaporative cooling and continuous fresh-air movement.
• Birkat Al Awamer: Warehouses, logistics facilities, and workshops can use ducted cooling across storage and working areas.
• Aba Saleel: Logistics operations and industrial facilities can use the cooler to distribute air through warehouses and workshops.
• Mesaieed: Industrial plants can use the SYC-40 PP in suitable production, maintenance, workshop, and storage areas.
• Ras Laffan: Industrial support facilities can use the unit to improve airflow in suitable workshops and maintenance buildings.
• Al Khor: Warehouses, service facilities, and workshops can use the cooler for large-area air circulation.
• Umm Salal: Storage facilities and workshops can use the SYC-40 PP for suitable ducted fresh-air cooling.
• Lusail: Commercial and service facilities can use the unit where evaporative cooling matches the building conditions.

Technical Specification

The manufacturer’s current site identifies SYC-40 PP (PRM) in its duct air cooler range, while the detailed product listing provides the values above.

How Does the SYC-40 PP Work?

The process begins with water circulating through the cooling media. Hot outside air enters the cooler and passes across this wet surface. Part of the water evaporates and absorbs heat from the incoming air. The axial fan then moves the resulting cooler air toward the 900 × 900 mm outlet. From there, suitable ducts can carry the airflow to selected zones.

Fresh-air movement remains an important part of evaporative cooling. Buildings should have suitable exhaust openings or ventilation paths so warm indoor air can leave as fresh cooled air enters. Actual cooling performance will vary according to ambient temperature, relative humidity, duct length, duct resistance, building heat load, ventilation, and installation design.

Why Choose SYC-40 PP from Nassguard?

The SYC-40 PP offers a practical option when a project needs high airflow rather than localized cooling. Its 30,000 CMH capacity and large outlet allow engineers to plan air distribution across sizeable working areas. Its 3 kW motor, axial fan, and 180–200 Pa pressure range also make the model useful for suitable ducted installations. Manual and remote control options keep operation straightforward.

Nassguard supplies the SYC-40 PP Duct Air Cooler and industrial cooling equipment for projects across Doha and Qatar.

Standards, Certifications and Compliance

Product-specific certification for the exact supplied unit should always be checked against its latest manufacturer documents. Relevant references for industrial electrical cooling equipment include:

• IEC 60335 – Safety of Household and Similar Electrical Appliances
  
• ISO 9001 – Quality Management Systems
  
• CE Marking Requirements
  
• RoHS – Restriction of Hazardous Substances
  

These references do not by themselves confirm that the SYC-40 PP carries each certification. Check the current manufacturer’s declaration, test reports, and product documentation before using compliance claims in tenders.

Frequently Asked Questions

1. What is the SYC-40 PP Duct Air Cooler?
It is a high-volume evaporative cooler intended to deliver fresh cooled air into suitable industrial and commercial spaces through direct or ducted distribution.

2. What is the airflow of the SYC-40 PP?
The published specification lists an airflow of 30,000 CMH.

3. What area can the SYC-40 PP cool?
The stated cooling area is approximately 250–300 m², although actual coverage depends on climate and site conditions.

4. What power does the SYC-40 PP require?
The detailed specification lists 3 kW, 3-phase 415V, 50 Hz operation.

5. Can the SYC-40 PP connect to ductwork?
Yes, the manufacturer’s duct cooler range supports ducted air distribution, and the SYC-40 PP has a listed 900 × 900 mm outlet.

6. Where can this industrial cooler be used?
It suits appropriate factories, warehouses, workshops, production facilities, logistics operations, and large commercial spaces.

7. Is the SYC-40 PP available in Qatar?
Nassguard supplies industrial cooling equipment for customer and project requirements across Doha and Qatar.

Conclusion

The SYC-40 PP Duct Air Cooler combines high-volume airflow with evaporative cooling for large industrial and commercial spaces. With 30,000 CMH airflow, a 3 kW motor, 180–200 Pa pressure, and stated coverage of 250–300 m², it can handle demanding fresh-air cooling requirements.

Its top/down discharge arrangement and large air outlet make duct integration practical for suitable projects. Factories, warehouses, workshops, logistics facilities, and production areas can use the system where climate and ventilation conditions favour evaporative cooling.

Nassguard supplies the SYC-40 PP for industrial cooling requirements across Qatar, Doha, and nearby industrial areas.